Multi Gateway manual update
Keeping your Multi Gateway firmware up to date ensures optimal performance, security, and compatibility with the latest GoBright features. Before activating the gateway in your GoBright portal, make sure it is running the latest firmware version. Follow the steps below to manually update the firmware on your Multi Gateway device.
After successfully updating the firmware, you can proceed with activating the gateway in your GoBright portal by following the instructions in the Activate a Multi Gateway Device article.
Steps to Perform the Firmware Update
- Access the Multi Gateway by entering the IP and port number :8080
- Check the Hardware model: MGW211 / MGW101
- Click Settings in the top-right corner.
- Navigate to System Actions and select Manual Firmware Update.
- Type “yes” to confirm and click Upload Firmware File.
-
Upload the firmware file, which can be downloaded using the link below:
Note: Select the link for the right Hardware model.MGW211: https://install.gobright.cloud/gateway/?mode=download&model=mgw211&version=5.16.4
MGW101: https://install.gobright.cloud/gateway/?mode=download&model=mgw101&version=5.16.4
The update to the latest firmware version is expected to take approximately 20 minutes.
After updating the Firmware you are able to activate the Gateway to your GoBright portal: you can use the article Activate a Multi Gateway Device.
