Installation of GoBright App on Neat Pad

This is an installation guide on how to install GoBright on the Neat Pad from factory settings.

1. Browse on your PC to https://pulse.neat.no and sign in (If you don’t have a Neat Pulse plan, sign up here: https://neat.no/pulse/#plans)
2. Go to Profiles and Press “+” Add profile
   
3. Give the profile a name and use these following settings and Save it
   
   
   
   
4. Select Apps on the left and under “Room availability (Neat Pad)” and toggle on the switch by GoBright
5. Select Automatically install on all App Hub devices and click Enable
   
6. Turn on the Neat Pad
7. Select your language and press Continue
8. Select “Add Neat Pad for room availability“ and press Continue
9. Press Skip (or take a look at the mounting guide)
10. Make sure the Neat Pad is connected to the internet and press Continue
11. Select the Time Zone and toggle the 24-hour time switch and press Continue
12. A Neat enrollment code is needed. Go to https://pulse.neat.no on your PC and select Devices on the left and press Add devices
    
13. Fill in a Name of space or device and select an profile and press Continue
    
    
14. Fill in the enrollment code on your Neat Pad. Do not unplug the Neat Pad and press Continue when the enrollment is finished.
15. Select if you want to share device Analytics and improvements with Neat and press Continue
16. Select Other and press Continue
    
17. Select GoBright and press Continue
18. “You’re all set!” select Launch Neat Apps. The Neat Pad is installing the GoBright app. Do not unplug the Neat Pad
19. Check Date and time zone and press Confirm

20. With the activation code you’re able to go to the next step and activate the display in the GoBright portal