Installation of GoBright Android App on Crestron TSS-1070 / TSS-770
This guide provides step-by-step instructions for installing the GoBright app on Crestron supported device. Please follow the steps below to complete the installation.
Check if your device is on the list of GoBright certified hardware here
Method: Using the local IP-address of the Room panel
1. Type in the IP address of the Room panel in a browser on a PC in the same network.
2. Sign in or create a username and password.
3. Go to the Setting tab in the top and open ‘System Setup‘ menu.
4. Select the correct time zone and time format.
5. Scroll down to ‘Device Display’ and set up the Standby Timeout to 0.
6. Scroll down to Proximity and disable the Wake On Proximity.
7. Scroll down to Applications and select ‘Application Mode‘. Search and select GoBright.
8. Scroll up and press ‘Save changes‘.
9. Select ‘Yes, Reboot Now’ in the pop-up window.
The Crestron display is now loaded with the new settings that include the GoBright App.
Note: This process will take about 3 to 4 minutes with a normal network connection.
10. After reboot, the GoBright App will start automatically. Select ‘Confirm and reboot’ on the device.
11. After selecting the ‘Confirm and reboot’ button, the device will start up with the GoBright app.
With the activation code you’re able to go to the next step and activate the display in the GoBright portal