Logicdata certified hardware
The Logicdata Control box shares the heigh information to the Interact and it controls the attached electric legs. The direct interaction of the Interact with heigh adjustable desks can be achieved by connecting the Interact Expansion box to the control box of the heigh adjustable desks.
Items needed
This is a list of the necessary items if you want to connect the Interact to a heigh adjustable desk:
- Interact device
- Expansion box
- Cable to connect the Logicdata control box to the GoBright expansion box
- Power adapted for the Interact. Please check the article Interact Accessories.
Depending on the desk control box model, the list might differ, and you may also need:
- DIN Converter cable
The DIN converter cable is an addition to the regular DIN cable to connect the Logicdata control box to the GoBright expansion box, facilitating the height adjustment of the desks.
Supported models
With the following Logicdata CB Desk DIN models, the desk control box doesn’t supply power to the GoBright Interact connected through the GoBright expansion box. In these cases, the adapter for the Interact to provide power is needed.
| Model | Power supply for the Interact from the Control Box | DIN Converter cable |
|---|---|---|
| Compact | No | Not needed |
| Smart Neo 2G | No | Not needed |
| Smart Neo 3G | No | Yes1) |
1) The DIN Converter cable is needed with the CB model Smart Neo 3G. This DIN cable connects the LOGICDATA CB control boxes to the GoBright expansion box along with INT1-Cable-LDCD, enabling height adjustment of the desk via the GoBright Interact. It refers to a standardized connector that is needed for control boxes type 3G. This DIN converter cable can be purchased at LOGICDATA.
Installation scheme
Purchasing
To purchase this combination of products, please see the article numbers of our price list to the products:
INT-1 Interact Booking Device
INT1-POE-DESK PoE and Desk Control Expansion Box for Interact Device
INT1-ADAPT-MULTI Power Adapter for Interact (EU/UK/US plug)
INT1-CABLE-LDCD LOGICDATA CB Desk Control Cable for Interact Expansion Box
DIN Cable1)
1) DIN Converter cable needed only with the Control Box model Smart Neo 3G. The DIN converter cable can be purchased at LOGICDATA.
Purchasing note:
1. INT1-CABLE-LDCD LOGICDATA CB Desk Control Cable for Interact Expansion Box can be purchased in GoBright.
2. Blue DIN cable for the Logicdata actuator should be purchased directly from Logicdata.
Installation instructions
Later in this article, detailed installation instructions are provided for integrating all components with the Interact system through the Logicdata control box.
Compact
The following images provide comprehensive installation instructions on how to install all components in conjunction with the Interact system for the Logicdata Compact model:
| Logicdata Compact | ||
|
1. Communication between Actuator and Expansion box. DIN plug of the cable goes into the DIN port of the actuator. 2. Legs control |
||
| Other side of Compact | ||
| 3. Power supply for the Logicdata actuator | ||
| 4. Front side of Logicdata Compact actuator | ||
| Logicdata DIN cable | ||
|
1. Connection to the Actuator – DIN plug of the cable goes into the DIN port of the actuator. 5. Connection to the Expansion box |
||
| Expansion box | ||
|
5. Connection of the cable to the Expansion box 6. Connection of the Expansion box to the Interact |
||
| Interact | ||
| Front side of the Interact | ||
| Back side of Interact | ||
|
6. Port for the Expansion box 7. Glow 8. Power supply for the Interact from the adapter |
Smart Neo 2G
The following images provide detailed installation instructions for integrating all components with the Logicdata Smart Neo 2G model as part of the Interact system.
| Logicdata Smart Neo 2G | ||
|
1. Communication between Interact and Actuator – DIN plug of the cable goes into the DIN port of the actuator 2. Legs control |
||
| Other side of Smart Neo 2G | ||
|
3. We don’t use this port 4. Power supply for the Logicdata actuator |
||
| Front side of Smart Neo 2G | ||
| Logicdata DIN cable | ||
|
1. Connection to the Actuator – DIN plug of the cable goes into the DIN port of the actuator 5. Connection to the Expansion box |
||
| Expansion box | ||
|
5. Connection of the cable to the Expansion box 6. Connection of the Expansion box to the Interact |
||
| Interact | ||
| Front side of the Interact | ||
| Back side of the Interact | ||
|
6. Port of the Expansion box 7. Glow 8. Power supply for the Interact from the adapter |
Titel
These images offer detailed instructions for installing all components with the Interact system on the Logicdata Smart Neo 3G model.
| Logicdata Smart Neo 3G | ||
|
1. We don’t use this port 2. Legs control |
||
| Other side of Smart Neo 3G | ||
|
3. Connection of the DIN cable to the Actuator 4. Power supply for the Logicdata actuator |
||
| Front side of Smart Neo 3G | ||
| Logicdata DIN cable | ||
|
3. Connection of the DIN cable to the Actuator 5. Communication between the cables – DIN plug of the black cable goes into the DIN port of the blue plug of this cable |
||
| Logicdata DIN cable | ||
|
5. Connection to the Actuator – DIN plug of the black cable goes into the DIN port of the blue plug of the other cable 6. Connection to the Expansion box |
||
| Expansion box | ||
|
6. Connection of the cable to the Expansion box 7. Connection of the Expansion box to the Interact |
||
| Interact | ||
| Front side of the Interact | ||
| Back side of the Interact | ||
|
7. Port for the Expansion box 8. Glow 9. Power supply for the Interact from the adapter |
If the control box you have is not on the list, please contact us on [email protected]