Installation of GoBright Device app on Qbic TD-1050 Android 5.1

1.1 Connect the device using a PoE+ cable or power it with an adapter, and connect it to Wi-Fi

1.2 (Optional) Perform a factory reset on the device: Go to Settings > Reset Options > Erase all data (Factory reset)

1.3 Select Settings in the bottom-right corner

1.4 Select Player Settings

1.5 Scroll down to Android System and enable “Switch to native android mode”

1.6 Press the center bottom HOME-dot in the navigation bar

2. Download the GoBright Device app

2.1 Open the Browser

2.2 Browse to https://install.gobright.cloud and select Meet/Work/Visit

2.3 Select Lower than Android 8

2.4 Select Download GoBright Device App (xx.xx) and confirm by tapping Download

3. Install the GoBright Device App

3.1 Press the center bottom HOME-dot in the navigation bar

3.2 Select the app drawer icon (six dots) and open APK installer

3.3 Select Install

3.4 Choose Internal Memory

3.5 Navigate to the Download folder

3.6 Select the downloaded APK file

3.7 In the security prompt, tap Settings and enable Unknown sources

3.8 Tap OK and go Back with the Arrow back icon

3.9 Select the APK file again and tap Next and Install
Wait for the installation to complete, then select Done

3.10 Press the center bottom HOME-dot in the navigation bar

3.11 Open Settings and select Player Settings

3.12 Scroll down to Android System and disable “Switch to native android mode”

3.13 Press the center bottom HOME-dot in the navigation bar

3.14 Press on the magnifying glass symbol and select GoBright – Device
The GoBright app will automatically launch after 20 seconds

3.15 Check Date and time (change if necessary) and select Confirm and reboot

3.16 After reboot your GoBright Activation Code is presented

With the activation code you’re able to go to the next step and activate the display in the GoBright portal

Notes

Internet connection

For the highest reliability, we strongly recommend using a wired network connection (PoE+) whenever possible.

If you need to use Wi-Fi, we recommend disabling the following options in the Android Wi-Fi settings:

• Avoid poor network connections
• Notify whenever a public network is available

Disabling these options can improve the reliability of the connection, for example when maintenance or changes are being made to the Wi-Fi network.

You can find these settings under Android Settings > Wi-Fi > Advanced.

To access the Android settings, you may first need to close the GoBright app on the display. See Close the GoBright app on a display for instructions.