Installation of The GoBright App on the non-rooted APPC-10SLBe

This is an installation guide on how to install the GoBright app on ProDVX 10SLBe displays.

Please follow the steps:

1. Plug the PoE+ cable into the device and press on START button on the startup screen

2. Select Don’t copy on the Copy apps & data pop up window

3. Select Skip on Google Sign in pop up window

4. Select Skip on Account setup pop-up window

5. Select More > Accept Google services

6. Skip Set screen lock

7. Press on Skip anyway the Set screen lock

8. Open the Google Chrome app

9. Press No thanks in the Turn on sync pop up window

10. Select Accept & continue

11. Go to the installation page install.gobright.cloud and press on Addons

12. Select ProDVX 10SLBe

13. Select Download anyway

14. Open the downloaded ProDVX API DELA-v1.2c apk

15. On Chrome security settings, press on Select

16. Switch the toggle button Allow from this source and then press twice on the arrow back button at the bottom of the screen

17. Press on Install and then on Open

18. Go back to the installation page install.gobright.cloud and press Meet / Work / Visit button

19. Select Android 8 or higher

20. Open Download GoBright Device App

21. Press on Download anyway

22. Open the downloaded apk file

23. Press on Install and then Open

24. On the pop-up window “Allow GoBright – Device to take pictures and record video” press on WHILE USING THE APP

25. After that, press again on Allow

26. Press Continue and open the GoBright-Device app

27. When you open the GoBright app, press to toggle on the Allow Do Not Disturb button and then press on Allow

28. Once this is on, press on the arrow back button at the bottom of the screen

29. Press Continue

30. Switch on the toggle button Allow modifying system settings and press on the arrow back button twice

31. This will lead you back to the app and press Continue

32. Select again the GoBright-Device app, switch on the toggle button Allow display over other apps and press twice on the arrow back button

33. Once this is done, check the settings. If these settings are correct, press on Confirm and reboot

34. The screen will reboot and then it will show the activation code. Activate your device by entering the activation code in your Portal as explained in the article The display shows an activation code

NOTES

*) Regarding the internet connection, we strongly advise to use wired (PoE+) connections for highest reliability.

If you have to use Wi-Fi, please make sure you have disabled the ‘Avoid poor network connections’ and ‘Notify whenever a public network is available’ in the Wi-Fi settings menu within Android. This will increase the reliability, for example when maintenance is done on the Wi-Fi network.

You can find this in the Android settings menu -> Wi-Fi -> Advanced. Read this article about how to close the GoBright Android App to enter Wi-Fi settings of the device: Close the GoBright app on a display

Please note: not all Android versions have these options, so these options might not be applicable for your device.