Philips BDL3452T series screen - Installing the GoBright App and settings.
Start up the display
- Choose your preferred language, date and time and select Next
- Enable in the Security Settings menu: SICP Network Port, FTP, Admin Password and Unknown Sources Installation and press Next
- Skip the Learnhub Settings
- Select in the Network Settings; Ethernet. Turn on Ethernet in the top and select Finish
- The device reboot and deny the promt about the CMND&Deploy to access photos, media, and files on your device.
- Select the arrow at the left or right side and select the gear icon.
The Picture and Audio settings can be set as preferred. - Configuration 1 can be set according to these settings:
- Select by Boot on source disable ‘Last Input’ and select by Input ‘Custom’
- Configuration 2 can be set according to these settings:
- In the Advanced option tab there are two important settings::
Off timer: set it to 24 hours (this prevents the screen entering a state of sleep caused by not touching it)
Power Save: set this to mode 4
Download the GoBright Device app
- Select the arrow at the left or right side and select the Home icon. Select in the Home screen Apps
- Select Chromium app
- Browse to https://install.gobright.cloud and select Meet/Work/Visit
- Select Android 8 or higher
- Select Download GoBright Device App (xx.xx)
- Select Continue in the prompt and Allow Chromium to access photos, media, and files on your device.
- Select OK in the next prompt
- Select Open and Install
- When the GoBright app is installed select Done
Install the GoBright Device App
- Select the arrow at the left or right side and select the gear icon.
- Go to the Android Settings and login with default password: 1234
- Select Signage Display
- Select Source settings
- Select Android source
- Select Custom app
- Enable “Force restart custom app” and click on select app>GoBright app>Save.
- Select the arrow at the left or right side and select the Home icon. Select in the Home screen Apps
- Open GoBright Device app
- Select 3 times Allow
- Select continue
- Switch on the toggle in the top and Allow
- Go back to the app and select continue again
- Switch on the toggle button
- Go back to the app and check Date and time (change if necessary) and select Confirm and reboot
- After reboot your GoBright Activation Code is presented
With the activation code you’re able to go to the next step and activate the display in the GoBright portal
NOTES
*) Regarding the internet connection, we strongly advise to use wired (PoE+) connections for highest reliability.
If you have to use Wi-Fi, please make sure you have disabled the ‘Avoid poor network connections’ and ‘Notify whenever a public network is available’ in the Wi-Fi settings menu within Android. This will increase the reliability, for example when maintenance is done on the Wi-Fi network.
You can find this in the Android settings menu -> Wi-Fi -> Advanced. Read this article about how to close the GoBright Android App to enter Wi-Fi settings of the device: Close the GoBright app on a display
Please note: not all Android versions have these options, so these options might not be applicable for your device.
