Installation of GoBright Android App on Philips displays

Follow the steps below when installing GoBright on the Philips displays:

Startup the display If you are presented with the initial installation wizard: skip all the steps but the network step If you already changed settings on the device you might want to reset to factory defaults first
Go to ‘admin mode’ by pressing the following button combination: Press the ‘menu’ button and keep it pressed Then press the ‘volume down’ button The display will go into ‘admin mode’ and will ask for an admin password (default: 1234) Now you are in the admin-mainmenu with the options: ‘settings’, ‘apps’, ‘network’ and ‘help’.
Make sure the display is connected to the internet*. If necessary, you can change the network settings, by choosing the option ‘network’ in the admin-mainmenu. Next you will be able to configure the WiFi or Ethernet settings to your preferences. Set the Android on-screen virtual keyboard as default Go to ‘admin mode’ (see above) Go to ‘settings’ > ‘system’ > ‘Language & input’ > ‘Virtual keyboard’ Select ‘Android Keyboard (AOSP)’ and disable all other keyboards Install the GoBright Device app: Download the app: Choose ‘apps’ in the admin-mainmenu Start the app ‘Chromium’ Browse to https://install.gobright.cloud The browser might ask for a confirmation if you really want to download the APK, please confirm by clicking ‘OK’ Please wait for a moment, unfortunately the browser does not give you feedback on when it’s downloaded Install the app: Go back to the admin-mainmenu and choose ‘apps’. Start the app ‘File Manager’ Open the folder ‘sdcard’ -> ‘Download’ There you will find the ‘GoBrightDevice_vX.X.apk’ app, please open this app by clicking it and choosing ‘Open’ An installation popup will appear, please choose ‘Install’ and wait for the installation to finish After installation, choose ‘Open’ to open the GoBright Device app The app will configure itself, this will take a few seconds The app will ask to check the date, time and timezone Set the app as boot on source: Go back to the admin-mainmenu and choose ‘settings’. Choose menu ‘Signage Display’ -> ‘Boot on source’ -> ‘Input’ -> ‘Custom app’ Then, choose menu ‘Signage Display’ -> ‘Custom app’ -> ‘Select App’ -> ‘GoBright Device’ -> ‘Save’ Reboot the device After reboot, the display will connect to GoBright, and show an activationcode With the activationcode you’re able to go to the next step and activate the display in the GoBright portal

Notes

*) Regarding the internet connection, we strongly advise to use wired (PoE+) connections for highest reliability.

If you have to use Wi-Fi, please make sure you have disabled the ‘Avoid poor network connections’ and ‘Notify whenever a public network is available’ in the Wi-Fi settings menu within Android. This will increase the reliability, for example when maintenance is done on the Wi-Fi network.

You can find this in the Android settings menu -> Wi-Fi -> Advanced. Read this article about how to close the GoBright Android App to enter Wi-Fi settings of the device: Close the GoBright app on a display

Please note: not all Android versions have these options, so these options might not be applicable for your device.