My Linak desk won't move up (anymore)

This means that the Linak control box needs initialization. This can easily be done by following these steps:

  1. Hold the down button on the GoBright Connect* or on the Linak desk panel to ensure the desk is retracted to its lower limit (whether it’s the fully retracted hard stop, or a configured lower limit).
  2. Briefly release the down button.
  3. Press and hold the down button again, for 5 seconds, wait until all desk movement has stopped, then release.
    • If initialization is successful, you should see a slight up/down “handshake” movement of the desk legs

*In rare cases these actions won’t work using the GoBright Connect. Please use the Linak desk panel instead in that case.

This article comes from the Help Center of GoBright.
View original article

Ask us anything! Find the answers to the most frequently asked questions here.

Browse the FAQ
Help center

A goldmine for all IT and Facility Managers. Dive into the technical stuff concerning our products and solutions.

Visit the help center

Wanna stay informed of all developments within the smart office and our new features? Subscribe now.

Subscribe now.